Tannoy y sus diferentes variantes.
29 mensajes
• Página 3 de 3 • 1, 2, 3
Re: Tannoy y sus diferentes variantes.
Va data de los drivers de la línea Sixes:
http://www.hilberink.nl/codehans/tannoy58.htm
Acá la Brochure de la línea completa MKII: (la que tengo yo)
http://www.hnny.nl/archief_tannoy/sixes ... ochure.PDF
Resumen de la línea sixes:
The SIXES were introduced at the Consumer Electronics Show in Chicago in June 1991. This range of
seven models comprised three discrete 2-way speakers and four Dual Concentric models. Of particular
note was the introduction of a 6.5" Dual, the smallest that Tannoy had ever designed.
The range was to replace Series 90, but with the incredible pace of development on Dual Concentric
drivers most of the range used either the 8" or the 6.5" Duals, the two top models having both driven
bass units and Mass Tuned Passive Cones to produce very low frequencies. Much research had gone into
this method of getting a much lower fundamental tuning of the cabinet and new techniques and materials
were becoming available.
Of particular note in the Sixes Dual Concentric drivers was the use of injection-molded cones. Most
manufacturers were content with vacuum forming cones because of the economy of the tooling. Tannoy
realized that the vacuum forming process could not obtain the optimum profiles required to make the
next quantum leap for the Dual. Very expensive injection molding tooling was developed and both the 8"
and 6.5" cones used this new technique.
Yet another first for Tannoy was seen in the surrounds of the SIXES bass units and Duals. A very
special and secret technique for making the roll surround an integral part of the cone profile
resulted in both excellent acoustic matching of energy in the cone and surround and gave a much
smoother transition for the HF wave front as it propagated down the profile.
The HF unit at the heart of the Dual Concentric drive unit is broadly similar in diaphragm and coil
design to a direct radiating unit. However the energy from the diaphragm is matched to the air load by
creating a spherically expanding wave front. This ensures that the directivity is even more constant
and symmetrical and the whole system produces an incredible stereo image.
The perfectly spherical wave front is generated by the Waveguide at the throat of the LF unit so that
the energy then propagates down the carefully arranged flare of the injection molded LF cone, which
itself is optimized to ensure a smooth and extended response well integrated with the bass/midrange
energy from the LF unit.
The SIXES Dual Concentric loudspeakers consist of:
609 using 2033l 8" Dual Concentric
611 using 2033 8" Dual Concentric, 2035 8" bass
613 using 1662 6.5" Dual Concentric, 1663 6.5" bass, 1664 6.5" MTPC
615 using 2033 8" Dual Concentric, 2034 8" bass, 2037 8" MTPC
http://www.hilberink.nl/codehans/tannoy58.htm
Acá la Brochure de la línea completa MKII: (la que tengo yo)
http://www.hnny.nl/archief_tannoy/sixes ... ochure.PDF
Resumen de la línea sixes:
The SIXES were introduced at the Consumer Electronics Show in Chicago in June 1991. This range of
seven models comprised three discrete 2-way speakers and four Dual Concentric models. Of particular
note was the introduction of a 6.5" Dual, the smallest that Tannoy had ever designed.
The range was to replace Series 90, but with the incredible pace of development on Dual Concentric
drivers most of the range used either the 8" or the 6.5" Duals, the two top models having both driven
bass units and Mass Tuned Passive Cones to produce very low frequencies. Much research had gone into
this method of getting a much lower fundamental tuning of the cabinet and new techniques and materials
were becoming available.
Of particular note in the Sixes Dual Concentric drivers was the use of injection-molded cones. Most
manufacturers were content with vacuum forming cones because of the economy of the tooling. Tannoy
realized that the vacuum forming process could not obtain the optimum profiles required to make the
next quantum leap for the Dual. Very expensive injection molding tooling was developed and both the 8"
and 6.5" cones used this new technique.
Yet another first for Tannoy was seen in the surrounds of the SIXES bass units and Duals. A very
special and secret technique for making the roll surround an integral part of the cone profile
resulted in both excellent acoustic matching of energy in the cone and surround and gave a much
smoother transition for the HF wave front as it propagated down the profile.
The HF unit at the heart of the Dual Concentric drive unit is broadly similar in diaphragm and coil
design to a direct radiating unit. However the energy from the diaphragm is matched to the air load by
creating a spherically expanding wave front. This ensures that the directivity is even more constant
and symmetrical and the whole system produces an incredible stereo image.
The perfectly spherical wave front is generated by the Waveguide at the throat of the LF unit so that
the energy then propagates down the carefully arranged flare of the injection molded LF cone, which
itself is optimized to ensure a smooth and extended response well integrated with the bass/midrange
energy from the LF unit.
The SIXES Dual Concentric loudspeakers consist of:
609 using 2033l 8" Dual Concentric
611 using 2033 8" Dual Concentric, 2035 8" bass
613 using 1662 6.5" Dual Concentric, 1663 6.5" bass, 1664 6.5" MTPC
615 using 2033 8" Dual Concentric, 2034 8" bass, 2037 8" MTPC
Hay dos cosas infinitas: el Universo y la estupidez humana. Y del Universo no estoy seguro - Albert Einstein
Re: Tannoy y sus diferentes variantes.
Hay dos cosas infinitas: el Universo y la estupidez humana. Y del Universo no estoy seguro - Albert Einstein
Re: Tannoy y sus diferentes variantes.
Muy bueno Sergio!
Las que yo ví en su momento eran las de 8" doble.
Me ganaron de mano y no llegué. Ni pude escucharlas. Pero me resultaban muy lindas esteticamente.
Veremos que tal suenan allá
Las que yo ví en su momento eran las de 8" doble.
Me ganaron de mano y no llegué. Ni pude escucharlas. Pero me resultaban muy lindas esteticamente.
Veremos que tal suenan allá
Ven. Sumate. Nosotros cuidamos a los soldaditos!
Re: Tannoy y sus diferentes variantes.
ramirof escribiste:Muy bueno Sergio!
Las que yo ví en su momento eran las de 8" doble.
Me ganaron de mano y no llegué. Ni pude escucharlas. Pero me resultaban muy lindas esteticamente.
Veremos que tal suenan allá
Dealé !
Hay dos cosas infinitas: el Universo y la estupidez humana. Y del Universo no estoy seguro - Albert Einstein
Re: Tannoy y sus diferentes variantes.
Rotel RCD991AE, , NAD T754-
QUAD 405 con revisión . Audiolab 8300a, Paradigm Studio 80 . Eosone RSF1000. -Téchnics SL 1300-
Analysis Plus Oval 12 - QED performance 40 - Transparent Premium Link
QUAD 405 con revisión . Audiolab 8300a, Paradigm Studio 80 . Eosone RSF1000. -Téchnics SL 1300-
Analysis Plus Oval 12 - QED performance 40 - Transparent Premium Link
Re: Tannoy y sus diferentes variantes.
The new cabinets of Dan Cramer.
http://www.hilberink.nl/codehans/tannoy7.htm
La explicación detallada, en el link.
http://www.hilberink.nl/codehans/tannoy7.htm
La explicación detallada, en el link.
Re: Tannoy y sus diferentes variantes.
Muy lindo laburo. Lindas cajas.
Ven. Sumate. Nosotros cuidamos a los soldaditos!
Re: Tannoy y sus diferentes variantes.
ramirof escribiste:Muy lindo laburo. Lindas cajas.
Estos tipos trabajan de verdad.
Y yo pretendo hacer bafles.
29 mensajes
• Página 3 de 3 • 1, 2, 3
¿Quién está conectado?
Usuarios navegando por este Foro: No hay usuarios registrados visitando el Foro y 4 invitados